Rekeying vs Changing Locks — What’s the Difference and Which Do You Need in Phoenix?

Share:

Table of Contents

Rekeying vs Changing Locks — What’s the Difference and Which Do You Need in Phoenix?

One of the most common questions Phoenix locksmiths hear: “Do I need to change my locks, or can I just rekey them?” The answer depends on the condition of your hardware, your reason for wanting new access control, and your budget. In most situations, rekeying is faster, cheaper, and accomplishes exactly what people think they need when they say “change the locks.”

Understanding the difference between rekeying and replacing a lock can save you a significant amount of money — and help you make the right security decision for your home or business.

What Rekeying Actually Does

A lock cylinder contains a series of spring-loaded pin stacks. Each stack has a key pin (bottom) and a driver pin (top). When no key is inserted, the driver pins block the cylinder from rotating. The correct key lifts each key pin to exactly the right height, aligning all the shear lines and allowing the cylinder to turn.

Rekeying changes the height of those key pins. A locksmith removes the cylinder, disassembles the pin stacks, and replaces the key pins with a different set — sized to match a new key. The cylinder housing, the bolt mechanism, the strike plate, and everything else stays exactly the same. Only the combination inside the cylinder changes.

After rekeying, the old keys no longer work. New keys cut to the new combination do. The lock looks identical, works identically, and provides the same security it did before — with different keys. If the existing hardware is in good working condition, rekeying achieves complete access control reset at a fraction of replacement cost.

What Lock Replacement Does

Lock replacement removes the entire lock assembly — cylinder, housing, bolt mechanism, and associated hardware — and installs a new unit. This is necessary when the hardware itself is damaged, worn, or inadequate for your security needs. It also makes sense when you want to upgrade to a different grade, style, or feature set (adding a deadbolt where there wasn’t one, upgrading from Grade 2 to Grade 1, or switching from a knob lock to a lever set).

Replacement costs more than rekeying because you’re paying for new hardware plus labor. But there are situations where it’s the right call — and a locksmith who recommends rekeying when your hardware genuinely needs replacement isn’t giving you the best advice.

Quick Guide: Rekey or Replace?

Rekey or Replace? — Situation Guide

Situation Rekey Replace Reason
Moved into a new home Yes Not needed Hardware is new/good; only access reset needed
Tenant moved out of rental Yes Not needed Fastest, cheapest access reset between tenants
Lost a key (one of many copies) Yes Not needed Access control reset without hardware change
Lock damaged / difficult to operate No Yes Hardware issue won’t be solved by rekeying
Upgrading Grade 2 to Grade 1 No Yes Need new hardware to get higher grade
Adding a deadbolt (none exists) No Yes New hardware required — nothing to rekey
Break-in attempt damaged cylinder No Yes Damaged cylinder may not secure properly
Want all exterior locks keyed alike Yes Not needed Rekeying all cylinders to same combination is standard

Cost Comparison: Rekeying vs Lock Replacement in Phoenix

Rekeying a standard pin tumbler cylinder in Phoenix typically runs $50–$80 per lock for a locksmith service call, with the per-lock cost decreasing when multiple locks are rekeyed in one visit. Some locksmiths charge a flat service call fee plus a per-cylinder rekeying fee — ask for the all-in total before booking. Our rekey service pricing is straightforward with no hidden fees.

Lock replacement runs higher because new hardware is involved. A Grade 1 deadbolt plus installation typically runs $120–$200 depending on the hardware selected. A full exterior lockset (knob/lever set plus deadbolt) runs $180–$350. Smart lock installation ranges from $200–$450 depending on the hardware. In most cases where the existing hardware is sound, rekeying saves $100–$200 per door compared to replacement.

The Most Common Scenario: Moving Into a New Home

When you buy a home in Phoenix, the previous owners, their real estate agent, and potentially contractors and cleaners all have keys that work your locks. The title company hands you the keys at closing, but you have no way of knowing how many copies exist or where they are.

Rekeying all exterior locks is the first thing that should happen after closing. If the hardware is in good shape — which it typically is in a home that just sold — there’s no reason to replace perfectly functional locks. A locksmith can rekey all exterior locks on an average Phoenix home in 45–90 minutes. If you want all locks keyed to the same key (one key opens front door, back door, garage entry, and any other exterior entry), that’s done during the same rekeying visit by pinning all cylinders to the same combination.

Rekeying for Rental Property Managers

Phoenix property managers who handle multiple rental units should build rekeying into every tenant turnover process. It’s a legal and liability baseline — some courts have found landlords liable for unauthorized entry by previous tenants when locks weren’t rekeyed between occupancies. At $50–$80 per rekey versus $150+ to replace, rekeying is the economical choice for standard turnovers.

When wear becomes visible after years of high-turnover rekeying — stiff cylinders, worn key pins, sluggish operation — that’s the signal to replace the hardware. Most Grade 1 deadbolts in a residential rental context should last through multiple rekeys before the hardware itself needs replacement.

What Rekeying Cannot Fix

Rekeying only changes the key combination. It cannot fix a deadbolt that doesn’t extend fully, a cylinder that’s become difficult to turn, a strike plate that’s pulling away from the frame, or a latch that doesn’t retract smoothly. These are hardware issues that require repair or replacement. If you’re requesting a rekey and the locksmith notes these conditions on arrival, listen — rekeying over a damaged cylinder just gives you a new key that operates a compromised lock.

Our lock repair service covers cylinders and hardware that need repair before or instead of rekeying. We assess the condition of your hardware on arrival and give you the honest recommendation before starting any work.

Keyed-Alike vs Master Key Systems

Two options often come up during rekeying discussions: keyed-alike and master key systems.

Keyed-alike means multiple locks are rekeyed to the same combination — one key operates all of them. This is the standard request for homeowners who want one key for the front door, back door, and garage entry. It’s accomplished during a rekeying visit by pinning all cylinders to the same key cuts.

A master key system goes further — individual keys open individual locks, but a master key opens all of them. This is standard for commercial properties, apartment complexes, and HOAs. Each unit gets a tenant key that only opens their door; the property manager holds the master key that opens all doors. Master key systems require planning the key hierarchy upfront and are more complex than simple keyed-alike systems. Our lock installation team designs and implements master key systems for Phoenix commercial and multi-family properties.

Frequently Asked Questions

Frequently Asked Questions — Rekeying vs Lock Replacement Phoenix

How long does rekeying take?+
A single standard deadbolt cylinder takes about 15–20 minutes to rekey on-site. Rekeying 3–4 exterior locks on a typical Phoenix home takes 45–75 minutes from a locksmith’s arrival. The time includes disassembling each cylinder, replacing the key pins, reassembling, and testing with the new keys before the locksmith leaves.

Is rekeying as secure as replacing the lock?+
Yes — if the hardware is in good condition. Rekeying changes the key combination inside the cylinder. The physical security of the bolt, housing, and strike plate is unchanged. If your existing hardware is Grade 1 in good working order, rekeying provides the same security as a brand-new lock of the same grade. The only reason rekeying would be less secure is if the hardware itself is worn, damaged, or an inadequate grade.

Can I rekey a lock myself?+
DIY rekeying kits exist for Kwikset SmartKey cylinders, which use a simplified rekeying mechanism. Standard pin tumbler cylinders require a follower tool, pinning tray, and the correct pin kit — and require removing the cylinder from the door. It’s doable for mechanically inclined homeowners with the right kit, but incorrect pin installation can leave a cylinder that doesn’t work with any key. For most homeowners, a professional rekey visit is faster and more reliable.

How much does rekeying cost in Phoenix?+
Mobile Locksmith charges a service call fee plus a per-cylinder rekeying fee. Call (623) 850-8511 with the number of locks and lock brands for an accurate quote. The per-lock cost typically decreases when rekeying multiple cylinders in one visit. A standard 3-lock home rekey (front door deadbolt, front door knob, back door deadbolt) is one of the most cost-effective security investments available.

Can all locks be rekeyed to one key?+
Yes — this is called keyed-alike and is a standard rekeying request. All cylinders being rekeyed in the same visit can be pinned to the same key combination. One key then operates all locks. The locks must use the same keyway (e.g., all Schlage, or all Kwikset) — you can’t rekey a Schlage and a Kwikset to the same key without replacing one of the cylinders with a matching keyway.

Should I rekey or replace locks after a break-in?+
After a break-in, the lock and door frame should both be inspected before deciding. If the cylinder was not damaged — if entry was forced through the door frame or a different method — rekeying may be appropriate once the frame is repaired. If the cylinder shows signs of drilling, picking, or forced entry, replacement is the right call. A locksmith can assess the damage on-site and recommend accordingly.

Mobile Locksmith provides rekeying and lock replacement across Phoenix from two locations: 5718 N 36th Dr, Phoenix, AZ 85019 and 4905 W Thomas Rd, Phoenix, AZ 85031. We carry pin kits for all major residential brands and Grade 1 deadbolt hardware on our trucks. Call (623) 850-8511 or (602) 834-2303 for a same-day rekey or replacement. Available 24 hours — contact us online or call direct. See our 5.0-star Google reviews from Phoenix homeowners and property managers who use us for all their rekeying needs.